GM1216
New Member
Well following on from my parts hoard post, I have thinned some of the herd but also gained a couple more in the process, but i digress.
I will probably have 3 unfinished projects posted up here by christmas not including the Z1000 that I've been working on for nearly 2 years. What can I say I have an addicts brain and i'm easily sidetracked.
So I did a USD front end conversion on my Speed Triple and then swapped the original complete front end for this shitty non running 1993 EX500.
A short while I ended up with a second EX500 because I have a motorcycle problem lol. And it was cheap. In my excitement I ripped into it before i took a before pic so here she is getting nakid
At this point I decided because they are horrible looking bikes and haven't seen many tastefully built EX's I would throw some of my newly acquired parts hoard at it and see if we can't polish a turd.
So with that in mind I promptly cut it pieces with my angle grinder.
I think I may have got a little carried away
I will probably have 3 unfinished projects posted up here by christmas not including the Z1000 that I've been working on for nearly 2 years. What can I say I have an addicts brain and i'm easily sidetracked.
So I did a USD front end conversion on my Speed Triple and then swapped the original complete front end for this shitty non running 1993 EX500.
A short while I ended up with a second EX500 because I have a motorcycle problem lol. And it was cheap. In my excitement I ripped into it before i took a before pic so here she is getting nakid
At this point I decided because they are horrible looking bikes and haven't seen many tastefully built EX's I would throw some of my newly acquired parts hoard at it and see if we can't polish a turd.
So with that in mind I promptly cut it pieces with my angle grinder.
I think I may have got a little carried away