Working on the details as each coat of Bondo dries on the plug of the gas tank. Soon, this mock-up of the tank will be done and ready to be used to cast the fiberglass gas tank molds. While waiting for the bondo to dry, I stripped the black paint from the headers. There were a few rusted areas on the rear cones that the previous owner filled with epoxy. Then, he painted the headers with a type of black epoxy paint. Took a major combination of chemicals to remove it. Once stripped, the pipes polished up nice. Ordered two small sheets of chromed steel that I will roll and cover the entire rear conical section of the pipes and trim with two new end caps.