slinds9
Been Around the Block
ive got some random stuff hanging around that i wont/cant use. garage is getting packed with shit, figured id post them up. i can post pictures if anyone is interested in anything. itll probably be sunday before i do though. gotta get wisdom teeth taken out tomorrow and from what i understand i shouldnt go anywhere near the garage for a day or so..
ive got a set of mags from a gs 650 shaft drive, fair shape, got them for next to nothing with decent tires so i swapped the tires out.
a good set of drilled front rotors from the 650.
a gs 400, or 550 seat. i cant remember which. in really good shape for the age. has one rip, looks like someone took a butter knife and stabbed it. the rip is maybe 1/16" wide and 2" long, but the pan is good, and its very useable.
stock exhaust from a 74 cb750, decent shape.
both side fairings for a 2002 cbr600f4i. theyre in primer right now, if i remember correctly they had light scratches.
stock cb750 taillight housing, no lens, had to use it on the 350 for now. good shape and worked perfectly. fits alot of early 70's hondas from what i can tell.
i know there is some other bike stuff, ill be adding to this over the weekend as im moving things around.
not bike parts but..
i also have a chevy 400 short block sitting in my garage that i will never use.. was run a few years ago, has been sitting for a while but spins freely.
1965 283/327 heads. will need rebuilt, valve seals are shot, and im sure theyll need guides as well.
350 rotating assy. newer rods and pistons, crank has developed some surface rust from sitting in the attic.
1970 ford 4 speed trans. pulled from a 70 torino gt with a 351 cleveland. bellhousing and release fork included, trans is missing shift linkage.
should also have the 351c at the house soon, ive been without a car for a couple months and too lazy to borrow one to get it..
willing to trade for a few things also..
a rear master cylinder, exhaust, tank or stator for a 78 gs1000..
cafe parts, a good clean set of carbs, or non horribly pitted wheels for a 72 cl350..
or something else?
ive got a set of mags from a gs 650 shaft drive, fair shape, got them for next to nothing with decent tires so i swapped the tires out.
a good set of drilled front rotors from the 650.
a gs 400, or 550 seat. i cant remember which. in really good shape for the age. has one rip, looks like someone took a butter knife and stabbed it. the rip is maybe 1/16" wide and 2" long, but the pan is good, and its very useable.
stock exhaust from a 74 cb750, decent shape.
both side fairings for a 2002 cbr600f4i. theyre in primer right now, if i remember correctly they had light scratches.
stock cb750 taillight housing, no lens, had to use it on the 350 for now. good shape and worked perfectly. fits alot of early 70's hondas from what i can tell.
i know there is some other bike stuff, ill be adding to this over the weekend as im moving things around.
not bike parts but..
i also have a chevy 400 short block sitting in my garage that i will never use.. was run a few years ago, has been sitting for a while but spins freely.
1965 283/327 heads. will need rebuilt, valve seals are shot, and im sure theyll need guides as well.
350 rotating assy. newer rods and pistons, crank has developed some surface rust from sitting in the attic.
1970 ford 4 speed trans. pulled from a 70 torino gt with a 351 cleveland. bellhousing and release fork included, trans is missing shift linkage.
should also have the 351c at the house soon, ive been without a car for a couple months and too lazy to borrow one to get it..
willing to trade for a few things also..
a rear master cylinder, exhaust, tank or stator for a 78 gs1000..
cafe parts, a good clean set of carbs, or non horribly pitted wheels for a 72 cl350..
or something else?
