RD400 Tank Dimensions

[Perdition]

Considering using an RD400 tank on my CB450 : but I can't seem to locate any dimensions to see if it will fit. If one of you RD owners out there (not Daytona) can measure your stock tank I would greatly appreciate it. The measurements I require are pictured below:

Thanks,
Trevor

 

[VonYinzer]

Ill measure mine tonight, if nobody else has.

 

[Perdition]

Ill measure mine tonight, if nobody else has.

Thanks man!!

 

[VonYinzer]

A: 4.75"
B: 3.5"
D: 11.5"
E: 22.25"

Sorry... Those are all the measurements I got. I was working from memory as I didnt have my laptop with me at the garage. Hope that helps.

 

[Perdition]

Thanks Von! That certainly helps. I'll harass someone on eBay for the other 2 measurements.

 

[VonYinzer]

Wait! I did have a couple more written down. Just on another piece of paper for some reason...

C: approx 8"

I didnt get the overall height of the tank but, the tunnel is 5.5" deep at the front, and 3.75" at the rear.

Hopefully that will do ya.