Rear Shock Lower Bushings - Where can U get them?

[WNTITAL]

I'm getting ready to have my cl350 powder coated and the rear bushings that the shocks mount to have to go. Where can I get a replacement set? Thanks.

 

[skatetheame]

Try your local Honda dealer. That's where I got some for my CB360

 

[Tim]

MikesXS sells sets of bushings.

 

[nukem1r]

I left mine in when i powdered my swing arm.. we just avoided that end and covered the bushings when we were blasting. The bake time was like 12 minutes on the powder and it didn't seem like it was enough to melt the rubber. But if they do get damaged i thought i saw that bikebandit sells those bushings and the bushings in the rear hub for the sprocket too.

 

[WNTITAL]

I left mine in when i powdered my swing arm.. we just avoided that end and covered the bushings when we were blasting. The bake time was like 12 minutes on the powder and it didn't seem like it was enough to melt the rubber. But if they do get damaged i thought i saw that bikebandit sells those bushings and the bushings in the rear hub for the sprocket too.

You are correct. BikeBandit does have them. $5.87 a piece. I spoke with my friend that's doing the PC and he stated to remove them so I don't have any problems. For $12, it's worth it.

Thanks everyone for the replies.