Rearsets not shifting properly

[facefirst35]

I bought some rearsets from J-Rod10 a while back and finally installed them. Everything works fine except the shifting side sticks. On the brake side if I don't have the linkage hooked up the rearset will swivel downward due to gravity. They are bolted down tight and they move smoothly. On the shift side when I tighten them down they won't move at all. I have a washer on each side of the passenger peg mount just like on the brake side but it doesn't move smoothly. Any idea what could be the issue? I can snap pics if needed. It looks exactly like the brake side set up, which as I said functions great.

 

[Rich Ard]

Where is it sticking? Also, pics or GTFO.

 

[carnivorous chicken]

I bought some rearsets from J-Rod10 a while back and finally installed them. Everything works fine except the shifting side sticks. On the brake side if I don't have the linkage hooked up the rearset will swivel downward due to gravity. They are bolted down tight and they move smoothly. On the shift side when I tighten them down they won't move at all. I have a washer on each side of the passenger peg mount just like on the brake side but it doesn't move smoothly. Any idea what could be the issue? I can snap pics if needed. It looks exactly like the brake side set up, which as I said functions great.

Have you tried lubing it?

 

[xb33bsa]

you have a captured bushing with too little side clearance at final assembly,something is wrong either with your assembly or the product, my guess is something is out of place by you
it shouldn't be to diff-cult ,you,deducing what is wrong.'specially because you are there

 

[facefirst35]

you have a captured bushing with too little side clearance at final assembly,something is wrong either with your assembly or the product, my guess is something is out of place by you
it shouldn't be to diff-cult ,you,deducing what is wrong.'specially because you are there

Turns out the J-Rod said there were some issues with the bushing being a hair too large. I'll have to file it down a bit. So not something out of place by me.