I want to heat wrap my pipes and I want to do it myself. removing the exhaust pipes seems really straight forward. But before I start taking things off I want to make sure I dont do something stupid in the process. It is as simple are removing all the bolts and just pulling them off? If some one has a video or can give me some steps that would be great!
Removing Exhaust pipes cb350 twin
- Thread starter habib
- Start date
OpTiCz
Coast to Coast
It was pretty simple for me.
The flanges unbolt, and there's a set of collars that come off too.
When the collars are off, the flanges should slide off too.
I would just use a brush and get rid of much rust as possible before wrapping them.
Wear gloves and long sleeves too, the exhaust wrap is made of fiberglass.
Use some stainless clamps or something at the end of each pipe.
The flanges unbolt, and there's a set of collars that come off too.
When the collars are off, the flanges should slide off too.
I would just use a brush and get rid of much rust as possible before wrapping them.
Wear gloves and long sleeves too, the exhaust wrap is made of fiberglass.
Use some stainless clamps or something at the end of each pipe.
