Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I need to remove the wires from the plugs on the alternator harness to slide new sleeps over them (they are wrapped in old tape now). I have tried the smallest screwdriver in my mini set with no luck. Is there a tool or a trick?
I usually beat a piece of welding wire flat and grind it narrower. ;D
Made one from the replaceable top pice of electric toothbrush, reasonably tough stainless steel, cut off bristles and dipped in ;Liquid Tape' looks like a 'real one' 8)
I used a small screwdriver, (One of those small ones that many places give out free, ground the point longer and straighter, and viola', a removal tool.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.