Revival of an enduro veteran

[scrambledpegs]

Im putting an 18 inch on the front of my ts250 hub. Did you use the same spokes from the 18 or purchase new spokes?

Sent from my GT-I9300 using Tapatalk 2

 

[Taras]

For the small flange I used the short spokes from the 21" and for the big flange on the hub I used rear wheel spokes which are all the same length. So you would need an extra rear wheel.

 

[Taras]

Alright, here are some minor updates.

The crankcase covers are back on.

Front light mounted, new handlebars and fork gaitors.

Rear wheel painted.

Time to mount the tank and start working on the seat.

 

[EL Sammo]

Looks good!

 

[Bert Jan]

Looks sweet dude! What bars are those? Ohw, imho, the hoop is waay too long? when you put the tank on, the seat will be huuuuuge. Could be my mistake though

 

[Taras]

You're absolutely right, I realized that and chopped about 7 inches of the frame.

 

[BoJordan]

any updates mate?

 

[Taras]

The build stopped completely during this summer. Too much work and basically had no time to go to the garage. Gotta finish it up this fall though.

On another note, I am going on a roadtrip from SF to Speedweek tomorrow and we are going to cover roughly 2400 miles in 10 days. I started a new thread on that here : http://www.dotheton.com/forum/index.php?topic=52081.new#new

 

[Bert Jan]

You're absolutely right, I realized that and chopped about 7 inches of the frame.

nice. i asked before, but wich bars are on the bike?

 

[mitchn06]

Any updates? So far this is almost exactly my vision of my 72 xl250.