sav0r
Coast to Coast
I know that the RFY shocks have quite a following, whether it be good or bad, there’s a good chance they aren’t going anywhere. I have read several accounts of them here on this forum, as well as accounts on other forums. Truth be told, many never do a complete and proper rebuild and as a result get really crappy results. Will these shocks be equal to an Ohlins set? Probably not. That said, after a good rebuild they do actually work fairly well, especially for the price point.
In the last few weeks I’ve been through my set with a fine tooth comb top to bottom. That meant taking them down and inspecting every part down the shim stacks. I have a fair amount of shock experience, mostly on Penske’s for racecars, but they are pretty much the same.
I am offering RFY rebuilds. This includes complete disassembly, inspection for potential problems, assembly with Maxima shock oil, and exact nitrogen charging using a proper shock charging tool. Once the shock is properly purged of air and the reservoir is charged these shocks work beautifully. I hope to get them on a shock dyno soon as to have some proof of it.
The cost is $75. This includes materials, labor, and return shipping. All you are responsible for is sending me your RFY’s. You can contact me here, but you'll have the best results getting me by emailing, the address is available on my website.
I am offering all DTT members a discount of $10.00. This will Expire 2/10/2014
The code is “DoThe100”
The easiest way to purchase is from my website. It uses a paypal checkout system.
My site can be found here - http://chrislivengood.net
I've updated link, as the old one had expired. To get to the products page just navigate via the links at the top right of my page.
In the last few weeks I’ve been through my set with a fine tooth comb top to bottom. That meant taking them down and inspecting every part down the shim stacks. I have a fair amount of shock experience, mostly on Penske’s for racecars, but they are pretty much the same.
I am offering RFY rebuilds. This includes complete disassembly, inspection for potential problems, assembly with Maxima shock oil, and exact nitrogen charging using a proper shock charging tool. Once the shock is properly purged of air and the reservoir is charged these shocks work beautifully. I hope to get them on a shock dyno soon as to have some proof of it.
The cost is $75. This includes materials, labor, and return shipping. All you are responsible for is sending me your RFY’s. You can contact me here, but you'll have the best results getting me by emailing, the address is available on my website.
I am offering all DTT members a discount of $10.00. This will Expire 2/10/2014
The code is “DoThe100”
The easiest way to purchase is from my website. It uses a paypal checkout system.
My site can be found here - http://chrislivengood.net
I've updated link, as the old one had expired. To get to the products page just navigate via the links at the top right of my page.