Runs on 1 cylinder.

Nortasaki

Active Member
My CB350 seems to be running only on 1 cylinder. I heard where this seems to be a common problem with these. If so what is it that has been found to be ths problem. I've yet to check all the wiring. It seems as though it fires a little bit on the left cylinder but definately runs stronger on the right.
 
Make sure battery is fully charged first. Seems strange but it seems like this fixes half my motor problems. It's an easy first step.
 
I found that the float was too high. I also changed the rectifier to a solidstate rectifier. The old rectifier was rusty and did nothing to charge the battery. All is well now.
 
Back
Top Bottom