Shock mount

[scfire]

Looking to put some Progressive 412 shocks on my cb350f but with them being eye mounts and Honda having the lower clevis mount, some modification is in order. I was thinking of welding a new mount but I found this today and wanted to know if anyone has tried this approach.

 

[haplo_84]

If I'm not mistaken progressive makes and eye to eye and a eye to clevis style so you shouldn't have to mod your swing arm much if you can find the eye to clevis ones.

 

[haplo_84]

here you go
http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Progressive+Rr+Shocks+12-series+13%22+12-1204B&item=PS12-1204B

http://www.z1enterprises.com/ItemDetails.aspx?itemDescription=Progressive+Rr+Shocks+12-series+14%22+12-1205B&item=PS12-1205B

 

[scfire]

If I'm not mistaken progressive makes and eye to eye and a eye to clevis style so you shouldn't have to mod your swing arm much if you can find the eye to clevis ones.

I am looking to buy used to save $$$ and those are hard to come by

 

[Dingo]

I'm having the same problem as you, you can buy/fab something like this kit (second one top to bottom):
http://www.lowridersbysummers.com/parts/index.htm

I'll be going that route, but instead of buying them a machinist buddy of mine will make the kit on a lathe.

 

[scfire]

I'm having the same problem as you, you can buy/fab something like this kit (second one top to bottom):
http://www.lowridersbysummers.com/parts/index.htm

I'll be going that route, but instead of buying them a machinist buddy of mine will make the kit on a lathe.

Just realized I didn't include that link but that is exactly what I was receding to.