Side stand options

[veloracermike]

So the PO removed the side stand and mount from my 350f. Any good safe and solid bolt on options to replace it out there?


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

 

[kevhead75]

Here is what I used on CB 350.

Kev
http://www.steadfastcycles.com/cart/index.php?main_page=product_info&cPath=171_179&products_id=4806

 

[HerrDeacon]

What keeps it from rotating on the frame? I know it clamps on, but would worry that it would spin under load.

 

[teddpage]

Re: Side stand options

I suppose you could use that kickstand and then put a few beads of weld on it to be sure. Or just weld on a tab and fabricate yer own

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

[veloracermike]

Here is what I used on CB 350.

Kev
http://www.steadfastcycles.com/cart/index.php?main_page=product_info&cPath=171_179&products_id=4806

Thanks Kev this is what I was looking for. Did you pin it? Or just clamp it? No slipping issues.

 

[kevhead75]

Just clamped it on. No problems yet. The inside bore has some grooves on it too keep it from slipping. Wish it was slightly longer but works fine for now.

Kev

 

[veloracermike]

Just clamped it on. No problems yet. The inside bore has some grooves on it too keep it from slipping. Wish it was slightly longer but works fine for now.

Kev

Thanks Kev...I'm placing my order now.