SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter,xs650

[Matt289]

new items, and prices ! it needs to all go!

​

hi guys,
Selling my extras which i don't need.
Small stuff can go in a flat rate postal box, frame will have to be ups or another shipper.
Located in Appleton,WI area.

Sl350 frame $200 shipped to your door or shipping depot with rubber tank mounts, swing arm shaft and bushings. Was going to build a flat/street tracker like Omars cb 350 trackmaster but plans changed.

xs650 front end complete $100 shippe trees, forks, axle

trz50 wheels 17 rear 16 front. narrow for cb cafe racer $150 shipped

xs650 brake disc $30 shipped

xs front brake system $50 shipped no master

rd350 complete brake system $50 shipped

cb350 twin starter motor $25 shipped works fine. includes wire sproket and chain

cb350 battery box 15 bucks shipped

68-69 cb350 bars with controls, clutch adjuster damaged, wiring good, everything buttons/switches work. 50 shipped These are the early chrome/unpainted housings.

PM for more photos I am a paypal user as well

 

[surffly]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

where are you for pick up?

 

[MarcW]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

I may be interested in the frame and wheels, where are you located?

 

[Matt289]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

opps sorry guys!
I'm located near appleton WI. zip 54130

 

[MarcW]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

opps sorry guys!
I'm located near appleton WI. zip 54130

Unfortunately that's a little too far from cleveland!!

 

[Matt289]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

i can always ship it to you...

 

[two-smoker]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

I hate this. I really want that xs 650 front end, and I live in milwaukee, so I could even drive to get it, but with no job, it's a moot point.

 

[MarcW]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

i can always ship it to you...

Just for shits and giggles... Shipping on the frame to 44035?

 

[scott s]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

You said TRZ50 wheels for a CB cafe racer.....what's the deal on that? What CB models and what's it take to make them fit?

 

[Matt289]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

tz50 is a overseas yamaha sport bike. I imported a 1kt tzr250 years ago and it was freaky fast. Anyways you will have to swap the bearings out in the rims to match the inner race to your honda axle.

 

[Matt289]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

I hate this. I really want that xs 650 front end, and I live in milwaukee, so I could even drive to get it, but with no job, it's a moot point.

I can toss you all the yamie stuff in my piles for $75 bucks if you strill want it. I hear ya about money being tight these days.

 

[mech11]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

Have you still got the XS front brake system?

 

[MarcW]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

Any idea on shipping the frame?

 

[Matt289]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

Have you still got the XS front brake system?

yes, still have it all and some more 69 cb350 stuff too. Can ship the brake stuff in a flat rate box to you for about 10-12 bucks if you want it.

 

[Matt289]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

Any idea on shipping the frame?

I have some friends that work for YRC so i can ship it to a terminal close to you. Or I use UPS alot and can get a qoute for you if you send me your address.
Thanks
Matt

 

[Matt289]

Re: SL 350 frame, XS650 front end, RD400 brakes, rd350 brakes, 350 starter

FIRE SALE!
added shipping costs to everything now.
If you want it please PM me and I'll send you my paypal info. When its sold I will remove the item from this post. If you have questions please PM me. I'm open to resonable offers if you don't think a price is fair. Not looking to get rich on this stuff, yet not get scrap vaule for it. I just want it gone ASAP.

 

[JustinLonghorn]

Do you have a RD400 front end laying around?

 

[Matt289]

Do you have a RD400 front end laying around?

negative

 

[78whiteorbs]

what year is that xs front end off of? do the fork lowers have holes for the earlier fender stays>?

 

[Matt289]

what year is that xs front end off of? do the fork lowers have holes for the earlier fender stays>?

77-78ish i think. been up stairs for a long time.
They have the lower front fender supports much like an early cb350 front end. Hope that helps.