SL350 Clutch push rod

[pdixon81]

I built an SL350 engine but the push rod is toast from a thrown drive chain. The cb and cl clutch push rods are not compatible with the sl engine. Let me know if you have an sl350 clutch push rod and how much with shipping to 49321. Paypal is preferred method of payment.
Thanks

 

[DrJ]

Not very many SLs out there. According to my parts source, it's still available from Honda but pricey.

Part Number: 22850-312-020
ROD, CLUTCH LIFTER (Honda Code 0230110) $33.35

Also, this part is for the later SL motor presumably the one without a starter, which does indeed have a different rod. The early motors used the same rod as the CBs and CLs.

 

[pdixon81]

It is a '71 engine w/o starter. I was hoping to get one cheaper than that... hopefully someone has one layin around.

 

[Kanticoy]

It is a '71 engine w/o starter. I was hoping to get one cheaper than that... hopefully someone has one layin around.

If not, make it. They're easy to do man. I did on for my last bike for the same reason. I used a piece of stock the same diameter and drilled one end for the actuator ball bearing and rounded the other. Works flawlessly.

 

[pdixon81]

I'm thinking that is probably what I'll end up doing.
Thanks for the info.