cgguy09
1971 CB350 K3
Hey guys,
I just rebuilt my engine and after she's been running for al lil' bit I start seeing a little bit of faint white smoke coming from the breather tube, I also notice smoke seeming to be emanating (very lightly) from the points (that is to say where the cam is rotating) Now I cleaned this section of the motorcycle engine with WD-40 and such & I was curious whether or not it was just that burning off or something serious.
Normally when smoke is coming from there i've read its bad news bears, but I know freshly built engines tend to smoke for a the first few hours they are running.
For whats it worth, no oil is in the points sockets, and the spark plugs are looking good.
The gasket kit I used was from DCC for cb/cl350 70-73
http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-engine-parts-honda-cb350-cl350-engine-gasket-set-16-6101.html
Thanks Champions
I just rebuilt my engine and after she's been running for al lil' bit I start seeing a little bit of faint white smoke coming from the breather tube, I also notice smoke seeming to be emanating (very lightly) from the points (that is to say where the cam is rotating) Now I cleaned this section of the motorcycle engine with WD-40 and such & I was curious whether or not it was just that burning off or something serious.
Normally when smoke is coming from there i've read its bad news bears, but I know freshly built engines tend to smoke for a the first few hours they are running.
For whats it worth, no oil is in the points sockets, and the spark plugs are looking good.
The gasket kit I used was from DCC for cb/cl350 70-73
http://www.dimecitycycles.com/vintage-cafe-racer-caferacer-bobber-brat-chopper-custom-motorcycle-engine-parts-honda-cb350-cl350-engine-gasket-set-16-6101.html
Thanks Champions