Ricky Racer
New Member
Over the last twenty years, I've amassed a huge collection of vintage part, most of which are Honda CB750 SOHC specific. Now, in my advancing years, it's time to start thinning the herd. To the walls!
I've had this front end for many years: the Cerianis were protected in my office and the 4LS was boxed in my shop.
The front end consists of: 35MM roadrace Cerianis in excellent condition complete with friction steering damper and all associated parts. The axle is special for the shown Suzuki GT750 4LS front brake. The Suzuki brake was completely bead-blasted and rebuilt (everything, including shoes) by Vintage Brake at an absurd cost. The Suzuki side plates were professionally machined to fit the Ceriani front end; that eliminated the speedo drive. The front rim is a valanced 2.15X18 D.I.D. and the stainless spokes were done by Buchanan's. Obviously, the outer brake drum was filleted for lightness and a distinctive, aggressive look. With the exception of one small scuff along the inner valance flange, the rim is in excellent condition. The brake-to-Ceriani mounting plates are unpolished aluminum and have a mounting hole to accommodate a cable retainer.
By my reckoning, it would cost at around $2600 to duplicate this package, but I'm open to reasonable (or not so reasonable; all I can do is decline...) offers. I'm well known within the Honda SOHC community and have an impeccable reputation that I intend to retain. Depending on what bike you choose to install this incredible front end on, you'll need to have a steering stem made to accommodate your frame and steering bearings. Other than that, you're golden!
Let me know! Feel free to PM me for any additional information. Thanks, Ted McCarty aka "Ricky Racer", Lakeside, California
I've had this front end for many years: the Cerianis were protected in my office and the 4LS was boxed in my shop.
The front end consists of: 35MM roadrace Cerianis in excellent condition complete with friction steering damper and all associated parts. The axle is special for the shown Suzuki GT750 4LS front brake. The Suzuki brake was completely bead-blasted and rebuilt (everything, including shoes) by Vintage Brake at an absurd cost. The Suzuki side plates were professionally machined to fit the Ceriani front end; that eliminated the speedo drive. The front rim is a valanced 2.15X18 D.I.D. and the stainless spokes were done by Buchanan's. Obviously, the outer brake drum was filleted for lightness and a distinctive, aggressive look. With the exception of one small scuff along the inner valance flange, the rim is in excellent condition. The brake-to-Ceriani mounting plates are unpolished aluminum and have a mounting hole to accommodate a cable retainer.
By my reckoning, it would cost at around $2600 to duplicate this package, but I'm open to reasonable (or not so reasonable; all I can do is decline...) offers. I'm well known within the Honda SOHC community and have an impeccable reputation that I intend to retain. Depending on what bike you choose to install this incredible front end on, you'll need to have a steering stem made to accommodate your frame and steering bearings. Other than that, you're golden!
Let me know! Feel free to PM me for any additional information. Thanks, Ted McCarty aka "Ricky Racer", Lakeside, California
