crazypj
Split personality, I fake being smart
You don't use platigauge on pistons, Plasticine or Play-Doh works fine.
Are you going to use it on crankpins to make sure big ends don't have too much clearance?
Just remembered, you can also use soft solder in smaller diameters (not silver solder), plumbing solder is mostly tin but diameter is too big. you can carefully thread it through plug hole and check without pulling head (although you may need to after checking)
Are you going to use it on crankpins to make sure big ends don't have too much clearance?
Just remembered, you can also use soft solder in smaller diameters (not silver solder), plumbing solder is mostly tin but diameter is too big. you can carefully thread it through plug hole and check without pulling head (although you may need to after checking)