rappz7
New Member
So im wiring up a new start/kill switch on my 1979 cb650 and i redid a bit of the wiring so now im not sure how this switch wires up. http://www.thisoldtractor.com/moto_guzzi_tonti_handlebar_switch_-_k_s_12-0203.html This is a link to the switch with a diagram showing which wires do what. This shows six wires but I now only have 5 wires coming from the original harness now. 1 is a black wire which i ran from the new fuse panel I installed 2 is yellow/red coming from the main 30amp fuse coming off the battery 3 is a black/white wire coming from the spark units to the coils or vice versa 4 is a green/yellow wire which i believe to be the brake light/taillight switch and 5 a white/green wire which originally ran to fused power which it still does. There are 6 wires for the switch but I only have 5 coming from the harness am I missing something, maybe a ground? I know this might be hard without any pics but im wondering if anybody can shed some light on this for me. How do I go about wiring this switch up? Any information will be greatly appreciated.
