Steering angle KZ400

[2_DONE_THE_TON]

hey guys!

i bought myself a nice cafe handlebar(no clip ons,clubman handles) for my kz400.the problem is a realised that it will hit the tank because of its lower form.

how do you guys deal with the steering angle?do you change the regulator/delimiter attached to the fork bridge of the bike?

thanks in advance

 

[orlowskij]

You could weld or drill/tap some kind of stop to the steering head or lower triple clamp, or pick up a set of superbike bars (or clip ons).

 

[crawdadman]

I just heated my bars and bent them to clear

 

[Nebr_Rex]

hey guys!

i bought myself a nice cafe handlebar(no clip ons,clubman handles) for my kz400.the problem is a realised that it will hit the tank because of its lower form.

how do you guys deal with the steering angle?do you change the regulator/delimiter attached to the fork bridge of the bike?

thanks in advance

Which way did you install them?
Is the center upside down or like the way they were before being cut.
You might want to mount them right side up and roll them forward a
little until they clear the tank to see if that will work for you.

.

 

[firebane]

easiest way is bar risers. Either fab up some or get some universal ones.

 

[Umusername]

Pictures?

 

[firebane]

This is a local company in Canada that makes some but there are others out there:
http://www.barrisersonline.com/