Hey guys...
Long story short...my rear brake cylinder seems be stuck.
I rebuilt my brake shoe with new seals.
The steel arm that actuates the brake pump in the rear doesnt even actuate,is there a way to repair/rebuild that master?
I guess theres corrosion in there causing the caliper to be stuck.
The dust cap is torn,the caliper doesnt leak.
I see three options:
1.)buy a STOCK maybe rebuild RD master cyl
2.)buy a rebuild kit (probably Yambits,around 60 dollars) and go to town
3.)buy a NEW master from e.g. a Yam R1 with a 5/8 sized caliper and modify it.
Do you guys know any 'new' brake pumps that work the way the RD does?
It has a steel arm that pumps from down to the downside of the brake pump.
Help appreciated.
Thanks in advance!
Long story short...my rear brake cylinder seems be stuck.
I rebuilt my brake shoe with new seals.
The steel arm that actuates the brake pump in the rear doesnt even actuate,is there a way to repair/rebuild that master?
I guess theres corrosion in there causing the caliper to be stuck.
The dust cap is torn,the caliper doesnt leak.
I see three options:
1.)buy a STOCK maybe rebuild RD master cyl
2.)buy a rebuild kit (probably Yambits,around 60 dollars) and go to town
3.)buy a NEW master from e.g. a Yam R1 with a 5/8 sized caliper and modify it.
Do you guys know any 'new' brake pumps that work the way the RD does?
It has a steel arm that pumps from down to the downside of the brake pump.
Help appreciated.
Thanks in advance!