Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Hello iam just starting my cafe racer project on a gsx 750 1982 suzuki.
I have some qeustions i want to change the front shock absorber for a upside down gsxr shock absorder what do i need to change to fit it any one tips end trics.
Second change is i want to change the swing arm for a gsxr 2003 k3 monoshock suspension has any one builth this system on a bike end whats the fitting. When i fit it are the gears in one line with engine gears or do i need the change the engine mounts also to get them in line. Any one tips or trick or same projects running.
Hello iam just starting my cafe racer project on a gsx 750 1982 suzuki.
I have some qeustions i want to change the front shock absorber for a upside down gsxr shock absorder what do i need to change to fit it any one tips end trics.
Second change is i want to change the swing arm for a gsxr 2003 k3 monoshock suspension has any one builth this system on a bike end whats the fitting. When i fit it are the gears in one line with engine gears or do i need the change the engine mounts also to get them in line. Any one tips or trick or same projects running.
Converting to a monoshock is a lot of work for not much gain (if anything, it's real easy to make a bike worse). And yes - the chain line will be way out.
1st gen GSXR1100 USD front ends are a bolt on fit (I think the USD's started with the L model in 1990). Same year 750 ones also fit but the forks are shorter. Suzuki used the same steering head bearings for most of their street bikes from 1980 to 1997 or so.
Yes i have changed the original swing arm. But ive i want to change to monoshockits allot of work i no but i want to no ive the gear of wheel end motor block are a way of on standaard motor mount or a little bit otherwuse i am going to use the stock swing arm. But the front end i want to change 100% iam going to look for a new fork because i like the look end handling.
just do it and show us how it looks! go to allballs.com and check their fork conversion chart and it will tell you what you need or if its possible without major modification and machining.
just do it and show us how it looks! go to allballs.com and check their fork conversion chart and it will tell you what you need or if its possible without major modification and machining.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.