2.3efi
Been Around the Block
I made a run of these and thought some of you may be interested. They are great to have around!
The tabs are made out of 10 gauge (.134") mild steel and have a 1 inch notch in them to mount flush to most vintage frames. You can also cut them flat to mount parallel with the frame.
They are great for cleanly mounting signals, cables, guns, knives, picture frames, you name it!
Complete: (28 Pieces total)
$26 Shipped
2 - .700" with .250" hole
2 - .700" with .375" hole
2 - 1" with .25" hole
2 - 1" with .375" hole
2 - 1" with .312" hole
2 - 1" with .5" hole
2 - 2.5" with .25" hole
2 - 2.5" with .312" hole
2 - 2.5" with .375" hole
2 - 2.5" with .5" hole
2 - 3.5" with .25" hole
2 - 3.5" with .375" hole
2 - 3.5" with .312" hole
2 - 3.5" with .5" hole
Long and Short: (16 Pieces total)
$16 Shipped
2 - 1" with .25" hole
2 - 1" with .375" hole
2 - 1" with .312" hole
2 - 1" with .5" hole
2 - 3.5" with .25" hole
2 - 3.5" with .375" hole
2 - 3.5" with .312" hole
2 - 3.5" with .5" hole
You can see them used here to mount the turn signals on my last build
The tabs are made out of 10 gauge (.134") mild steel and have a 1 inch notch in them to mount flush to most vintage frames. You can also cut them flat to mount parallel with the frame.
They are great for cleanly mounting signals, cables, guns, knives, picture frames, you name it!
Complete: (28 Pieces total)
$26 Shipped
2 - .700" with .250" hole
2 - .700" with .375" hole
2 - 1" with .25" hole
2 - 1" with .375" hole
2 - 1" with .312" hole
2 - 1" with .5" hole
2 - 2.5" with .25" hole
2 - 2.5" with .312" hole
2 - 2.5" with .375" hole
2 - 2.5" with .5" hole
2 - 3.5" with .25" hole
2 - 3.5" with .375" hole
2 - 3.5" with .312" hole
2 - 3.5" with .5" hole
Long and Short: (16 Pieces total)
$16 Shipped
2 - 1" with .25" hole
2 - 1" with .375" hole
2 - 1" with .312" hole
2 - 1" with .5" hole
2 - 3.5" with .25" hole
2 - 3.5" with .375" hole
2 - 3.5" with .312" hole
2 - 3.5" with .5" hole
You can see them used here to mount the turn signals on my last build
