Tail pcs

[ken hosford]

Seeing as I can not manage to sell full seat bases to my amazement let us try the DIY program What you see is surface rust on 1-5 in triangle 1 and 2 are alloy and s1 and s2 are stainless steel prices plus shipping . I should mention the width can be narrowed or widened by stretching or compressing , if you stretch it it will change height some and visa versa Ken

in circle or plain
#1 $25 steel 9.5 " wide , 10"/12" long 5" high
#2 $35 steel 9.5 " wide , 10"/13" long 5" high
#3 $25 steel 11 " wide , 8"/11" long 5" high
#4 $35 steel 10 " wide , 10"/12" long 5 1/2" high
#5 $50 steel 12 " wide , 10"/12" long 5" high
in triangle
#1 $50 alloy 10 " wide , 11"/14" long 5 1/4" high
#2 $50 alloy 9.5 " wide , 12"/13" long 4 1/2" high
With S
S1 $70 stain less steel 11 1/4" Wide 10"/11 1/2" Long 5"high
S1 $65 stain less steel 10 1/2" Wide 9 1/2"/11 1/2" Long 5"high

 

[scott s]

Hmmm.....tempted to see if you can make a Thruxton style cover to go over the rear of my stock CB500/4 seat.

 

[ken hosford]

Moe than likely the challenge would be how to convey your needs in a way that would work for both parties Ken

 

[Finnigan]

kind of unrelated but do you make seat pans?

 

[ken hosford]

like pictured OR? yes

 

[Finnigan]

Sorry I should have clarified, I mean something much simpler, kind of like this:
http://www.dimecitycycles.com/vintage-brat-style-chassis-seat-parts-dcc-originals-large-cc-seat-dcc-lccbrat.html

 

[78whiteorbs]

do any trading? Where were you selling those and how much were you asking? I seem to recall seeing something on ebay similar for rd350's , like a tank and seat set. Was that you ? Nice work!

 

[ken hosford]

Trading no well maybe if you have something of interest to me no not me on ebay Ken

 

[Finnigan]

Can you make a seat pan like the one in the link if i give you dimensions?

 

[ken hosford]

sure why not , it is not my style but no problem. you are not limited to flt top it could have a gentle crown side to side or kick up in front , you need not be limited to simply flat wit a bend . let your imagination go free . I presume you are covering it ?

 

[Finnigan]

yup covering it, i'll draw some ideas up!