So, I am building a custom cafe bike...or maybe it's a sport bike of sorts. Either way, I am using the forks from an R6, but only using the brake on one side. Once I get the front end all mocked up, I will cut the caliper mount off of the right hand side of the forks. I just finished machining a hub that will allow me to use an excel spoked rim with these forks. I have to ship the hub off to Buchanan's to have the spokes made and the rim drilled for the flange width.
I still need to machine a carrier for the rotor to mount to the hub. Anyway, I will continue to post more as the project continues. The motor I will be using is a 01' YZ426 that I bought from a guy off of CL. It needs some work, but should move this bike around pretty quick. Enjoy the pics for now!
Ryan
I still need to machine a carrier for the rotor to mount to the hub. Anyway, I will continue to post more as the project continues. The motor I will be using is a 01' YZ426 that I bought from a guy off of CL. It needs some work, but should move this bike around pretty quick. Enjoy the pics for now!
Ryan