Top end parts for a 71 CB350K

L

lhemrick

Active Member
I'm looking for parts for a 1971 CB350K. The top of the my engine stopped oiling so I'm looking for a cam, rockers and end blocks. Can anyone help?

Thanks
 
I won't be able to take it apart till maybe Sunday at the earliest, but when I do I will snap some pics and get back to you.
 
OK thanks! If you want to send them to my email or you can post them here which ever you prefer. mdhemrick@yahoo.com
 
i should have a good set of end block bushings,and i think i have a few good rockers if you still need
pm me for pics and details
cheers,kenny
 
I have acquired new parts, got the engine cleaned out and back together. I'm still having an issue with the bike not oiling but only when the oil gets hot. I can still make it oil by idling up a little so I'm still searching for the answer why its not. The pump is good I ran a trial by heating some oil in a pan to thin it and manually operating before I reinstalled it and it worked fine. I've ordered a new O ring and clip for the slinger cap to see if I might be loosing oil there when it thins. Other than that I have no idea do you?

Thanks
 
I wonder if you have oil passageways that are partially blocked? Then it would be difficult for oil to get through until it warmed up and thinned out.
 
Thats the problem. It oils fine until it gets hot and the oil thins. After that I have to idle it up some to get oil out of the bleed bolt at the top of the head. I have ordered a new O ring and clip for the slinger cap. I think I may be loosing oil out of cap there when it thins. We will see.

Thanks for your time!
 
Ah, I had ya backwards. Well, best luck. PM me if you need parts - I have a 1973 CL350 motor for parts.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom