Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Workin away on my wife's CB350f, and found a nasty crack in the top triple clamp. Can't seem to find a specific used replacement for it on eBay, so I'm wondering what all triple clamps are a direct swap.
That's exactly how mine was broken. I had to take mine to a buddy to have it tig welded back together. Someone has over tightened it probably at some point.
I believe that 400F ones will fit too, with but with different mounting for idiot lights (although the 350F idiot lights can be put on the handlebar clamps). But they're also probably pretty expensive these days...
I've been visiting that page a lot over the last couple of days haha. Those are really sharp. I think when I can justify spending some more on her bike, I think I'll invest in a nice top and bottom set like that so they match.
I don't know how the vintage bike salvage yard scene is out there in iowa, but you could look up and see if you can find some in the area or close ish. I have one here local that has been a real life saver for some stuff like that
I've tried a couple in iowa so far. One of them has one, but wants $150 + shipping for it. Personally I think that's kinda steep. At this point I'm thinking I'll just weld it back together for the time-being. Then later this month or the next just dish out a little extra for a nice top and bottom set of CNC clamps, like the one you linked to above.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.