jakeZ70
Been Around the Block
I'm going to dive into using two stage paints, with an actual sprayer and compressor set up. I've done research as far as time between coats, technique, etc. It all looks pretty straight forward.
But as far as purchasing primer, paint and clear coat, I have no idea where to start. I don't want to purchase top of the line paint, this isn't going to be a show bike, but I don't want garbage either.
I'm using an LVLP gun. Not sure if that matters or not. I'm looking to use straight color on this project. No pearl, or metal flake. Any help at all is appreciated.
But as far as purchasing primer, paint and clear coat, I have no idea where to start. I don't want to purchase top of the line paint, this isn't going to be a show bike, but I don't want garbage either.
I'm using an LVLP gun. Not sure if that matters or not. I'm looking to use straight color on this project. No pearl, or metal flake. Any help at all is appreciated.