Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
50gary
I don't think this is correct:
"if the hole in the lower triple clamp is 1" the stem must be 1.001" if the hole is 1.25" diameter the stem must be 1.00125" and so on. "
50gary
I don't think this is correct:
"if the hole in the lower triple clamp is 1" the stem must be 1.001" if the hole is 1.25" diameter the stem must be 1.00125" and so on. "
If the hole is 1.25" dia then the stem should be 1.25125" dia. Just saying! Also if you put the stem in the freezer for a few hours and heat up the lower triple the stem will slide in without using a press.
$1000-1200 includes the following
08 GSXR front end complete - $500
progressive suspension lowering kit for gsxr forks -$100
fork seals and fork oil- $50
harley dyna hub- $75
aluminum rim-$100
stainless spokes $100
all balls bearing conversion -$40
machined spacer for lower triple-$40
hyabusa rotor- $40
machining rotor to fit dyna hub-$40
conversion bearings for front hub- $30
$1000-1200 includes the following
08 GSXR front end complete - $500
progressive suspension lowering kit for gsxr forks -$100
fork seals and fork oil- $50
harley dyna hub- $75
aluminum rim-$100
stainless spokes $100
all balls bearing conversion -$40
machined spacer for lower triple-$40
hyabusa rotor- $40
machining rotor to fit dyna hub-$40
conversion bearings for front hub- $30
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.