WANTED: Parts for CB125

[tete]

Im looking for any of the following so hit me up if you have anything to sell.

Front / rear fender
moped clubmans or 27mm clip ons
CB or CL 125s exhaust
small cafe seat pan or cafe seat ( just to see whats out there)
rear sets that would fit such a small bike.


thanks
Tete / Vic

 

[surffly]

I might have a rear fender
clubmans suck on the 125 with stock pegs
rearsets are hard to fab and there are no bolt on kits

I also have a performance head and cylinder, brand new.
Might have a few other parts

 

[eyhonda]

Yeah, better to get a flat or low-rise bar. CB400f bars are nice if you can find one. Or try the cb900f (cb919) or the s90 (super 90). Honda CR bars might work too (CR125 or 250 with removable cross bar). I found a set of aluminum Renthal bars. Haven't received them yet but I hope the bend profile will work good.

For footpegs, find the CL versions. The pegs are the folding type and you can possibly fit a peg that is more rearset (like an L shaped peg facing more rearward). The CB footpeg assembly is a one piece solid part. The shifter can be reversed but the brake side will need something more custom to reach more rearward.

 

[BR]

Rearsets aren't too bad to fab up for the 125 here is a link to my facebook page with the ones I did on a 125 recently. I stole the idea from a racer friend who has done several of these on 125's. I'll try to post a picture also if I can remember how.
https://www.facebook.com/media/set/?set=a.328267317239566.81632.157917390941227&type=3

 

[eyhonda]

Hit up member MarcW for clip-ons. He's taking orders now. $65 shipped to me in Michigan.

FYI. Stock clip-ons from a YSR50 are 27mm. Most are bent though.
>> Correction! They are only about 24mm.


I have a front fender from a CL100. It's a scrambler style but can probably cut down for a cafe style.

 

[crowe77]

Not sure if you are still looking but i have a 1979 cb125 front fender.

Also have a small seat pan

 

[tete]

I think I'm ok with the fender. I plan on just choppin the one I have to essentially be a brace. If I don't like it then ill source a fender. I actually like the clubman bars. The seem to sit ok after chopping 2 inches off each end.

I also changed the grips this weekend. Went with a faux leather wrap.

As for the rearsets, what you worked up there looks ideal.

I have the original seat pan and a seat I'm glassine up but so far I'm having a few issues. Is the seat pan you have aftermarket or OEM? Let me know. Thanks
T

 

[crowe77]

It WAS an oem...i cant seem to find it though?!?

 

[crowe77]

I have a ton of other shit if you are intrested.

I cafed a 79 cb125 and have a bunch of stuff left over.

Email me your phone numbe if u want and i can let u know what i have.

Craig_montesano@hotmail.com