will pay for a machined stepped stud

[mrkil]

hey guys i'm looking to have a stepped stud machined up for my xs engine's exhaust.

heli coiled and it was stripped out.

i need one of these

specs are
m12x1.25
m8x1.25
total length 43mm

let me if you can do this and how much

thanks
jeff

 

[crazypj]

If you get stuck I'll do it but I have a bunch of other things to make first
The ones shown have a rolled thread which is quite a bit stronger than a cut thread (which is all I could do)


PJ

 

[SquadraCorse]

hey guys i'm looking to have a stepped stud machined up for my xs engine's exhaust.

heli coiled and it was stripped out.

i need one of these

specs are
m12x1.25
m8x1.25
total length 43mm

let me if you can do this and how much

thanks
jeff

You only need 1?

 

[crazypj]

Are you sure you want 12x1.25mm?
I found a high tensile bolt with that thread I could modify pretty easy (ie, quick and cheap )

PJ

 

[mrkil]

for sure i need 12x1.25 and yeah i only need one.

it's just to fix a screwed up exhaust stud.

i'd pay $15 shipped for it just so i can finish my motor

 

[Swagger]

Waiting to hear how this turns out..

 

[Tim]

So was the original stud 8mm into the head? Have you considered just running a straight 12mm stud and opening up the exhaust mounting flange to accept the larger stud?

 

[mrkil]

original stud was 8mm not the later 10mm

i'd like it to look as normal as possible.

 

[crazypj]

Waiting to hear how this turns out..

I think its going to turn out a lot like this ;D
PJ

 

[Tim]

Nice....

 

[jay_kent]

you work fast pj

 

[mrkil]

awesome
you rock pj

 

[mrkil]

money sent