Wiring issue - new controls on CB750

[origin8or]

Hey guys, I am attempting to upgrade the right side controls on my CB to a modern unit and I am stumped on the wiring.

Based on the CB wiring diagram (below) the starter switch itself contains 4 wires:
Red with Black - to fuse
blue with white - headlight (can this be removed and kept only in the left side?)
black - ? main power or ground - I dunno, I would say ground but my test light shows this as the only live wire with the key on.
yellow with red - starter relay

then the kill switch uses:
black - must be ground
black with white - to coils

My modern right site controls are:
kill switch:
Red with black - Run (on position)
Red with White - kill (off position)

push start:
Blue -
Black -

Any ideas how to wire this up, what wires can be omitted or put together?

thanks in advance!

 

[Big R]

On older Hondas, the green wire is ground while the black is live.

 

[crazypj]

On new Honda's green is ground and black is live.
Red is live from battery to ignition switch
They don't change specific colours, if you have any Honda vehicle the colours stay the same
If I could be bothered I would post up live and ground for the 'big 4'
They have stayed the same since at least mid 1960's
It ain't rocket science so anyone can look it up
If you have a grounding engine switch you'll get through a lot of fuses before you figure it out, it needs live in, live out

 

[origin8or]

Thanks guys, got is all solved. Left side was a breeze after all of this ;D

Just waiting on some misc items from Dime City and I should be riding in no time.