Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Re: Woody's 1972 CL350 Brat-tracker Project Bike - NEW PICS July 21
I kinda like side covers on the scramblers. The pipes go right across that area on the left side, and in the interest of having it run well I'm running stock air-cleaners etc... This bike was too clean to begin with to really hack it up too much. In the interest of getting back on the road ASAP I chose not to do anything too radical like relocating electronics.
As for the seat I need to get the pan buttoned up and then I can talk with some upholsterers this week. I'm hoping to find a happy medium between black, and some thing really distressed. I'll see what the upholstery people think.
- Woody
Kev Nemo said:
Bummer you couldn't have put the battery in the rear tail section and done away with the sidecovers/glovebox/battery holder completely-would've looked super-tough. Really diggin' the seat. Did you do something other than black?
Re: Woody's 1972 CL350 Brat-tracker Project Bike - NEW PICS July 21
Hey Chris,
My bro and I are still working on the CM400 we scored for free... we'll get it done (when he has time) and then we'll decide if we want to sell it and re-invest in something else or what. He want's something a little bigger that he and the wifey can go two-up on a little easier. Probably CB550/750 or XS650.
This bike is staying with me... it has already been deemed the "buddy bike".
I need to get cracking on the seat tonight or tomorrow. I'm being hard headed and I won't fire it up until I have the seat back. Just how I am.
- Woody
motofiaccone said:
Hey Woody:
This is really looking fantastic. Well done. Is this the bike for your brother or are you keeping her?
Re: Woody's 1972 CL350 Brat-tracker Project Bike - NEW PICS July 21
Is a headlight rockguard off a jeep, I got the extra one (since he got them as a pair) from a member of the Hondatwins.net forum. I basically took the headlight out of the rim, buy removing the left/right adjuster screws and then removing the top and bottom pivot pins. I used tinsnips to clip the rim of the rockguard off and a little more until it layed down into the HL rim nicely. Then I reinstalled the bulb. The pressure of the bulb against the guard is what is holding it in. It's freakin' tight... it' aint moving.
Hope that's clear. I didn't take pics.
- Woody
midnightcafe said:
Sorry I'm at work, don't have time to search the thread- but I really want to know how you integrated that mesh onto your headlight??
Re: Woody's 1972 CL350 Brat-tracker Project Bike - NEW PICS July 21
woody1981 said:
Is a headlight rockguard off a jeep, I got the extra one (since he got them as a pair) from a member of the Hondatwins.net forum. I basically took the headlight out of the rim, buy removing the left/right adjuster screws and then removing the top and bottom pivot pins. I used tinsnips to clip the rim of the rockguard off and a little more until it layed down into the HL rim nicely. Then I reinstalled the bulb. The pressure of the bulb against the guard is what is holding it in. It's freakin' tight... it' aint moving.
Re: Woody's 1972 CL350 Brat-tracker Project Bike - NEW PICS July 21
Patience grasshoppa. I am going to finish up the pan with a buddy tonight. Hope to get it to upholstery tomorrow. I don't know what the turn will be on that... hopefully not more then a week.
- Woody
valvesprung said:
Dammit man...you can't keep me waiting in suspense any longer! ;D
Re: Woody's 1972 CL350 Brat-tracker Project Bike - NEW PICS July 21
Quick update... but no pics yet.
Installed 11" shorty shocks tonight. Even thought they are .75" shorter then the redwings, they are way stiffer... and they're lower, so they must be better.
Seatpan was finished and is at the best upholstery guy in the area. Should be done this week. Hope to shoot photos next weekend.
Re: Woody's 1972 CL350 Brat-tracker tweed jacket bike - NEW PICS June 19
woody1981 said:
Questions:
What bars?
Bikemaster Euro Touring Bars - Available from Dime City Cycles
What signals? Mini Billet Single Filament - Also, Dime City Cycles
Any changes done to the frame? No frame mods, but the damper-rods in the forks have been shortened (lowered) 1.5" and the rear shocks are 12" instead of the 13" stockers... might do 11" in the future. We'll see how it rides.
This is definite cool. One thing that is inspiring is that you didn't cut the frame. So many brat style bikes have cut frames. Since I'm in a state with very picky title laws, clean unmolested frames are worth money. Cut the frame? Lose the value.
So your tail section covering the rear fender tabs is ingenious. Did you have to bend it down to lay flat? On many, they curve up, exposing the fender tabs.
I plan to use many of the same styling aspects as your build, but with more of a cafe flare. Think cafe-brat.
Without further ado. Here are some pics of the final product. I really wanted some 70's period looking shots. I love them. If anyone wants more detailed shots I can snap them. But I'm super happy with the way these shots turned out. Curious to hear what you guys think of my choices on the paint etc... I strive for different, I think I got it.
New "Old Paint" by Josh Christy of VanChase Studio - VanChase.com
Seat upholstery by Scott Downy - Wichita, Kansas
Photography by Justin Ochs - justinochs.com
Thanks guys. I need to get some shots of the two of my bikes together now. I love them both, but for different reasons. I think it's cool how much flexibility in how these little bikes can be styled... from cafe to tracker to bobber to brat.
I'll be honest, as perfect and shiny as the resy of the bike is I would have loved an equivalent paint job, that being said I fuggin love the bike from top to bottom mate. Really stellar work and easily my favorite bike on this site, it just fits where I'm at right now for build styling.
Actually, I've had the same thought... but the one redeeming quality in real life is that even though its distressed, it's shiney and smooth as silk. But I'll let you in on a secrete. I still have the original tank and it's at my painters right now... he's basically buffing it out and adding a satin-black "panel" using the original side stripes as a guide, and hand pinstriping. He also did a set of my side covers in satin black. So I basically have two full sets of tins. This bike can change clothes
I'm gonna roll it this way for a while, maybe change it up in the spring or something.
- Woody
valvesprung said:
I'll be honest, as perfect and shiny as the resy of the bike is I would have loved an equivalent paint job, that being said I fuggin love the bike from top to bottom mate. Really stellar work and easily my favorite bike on this site, it just fits where I'm at right now for build styling.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.