Recent content by bp.designs

blueandy- Sure you can use my sketch. Pretty cool actually. So I've really been thinking alot about rebuilding my rear sliding cowl. It works great, but I am about to purchase a new battery and rework my wiring to clean things up. I am planning on doing a complete video on the wiring as well...

Ok guys! So I figured out I needed bigger main jets. I replaced the #68's with 70's and it helped a little bit. To be honest the bike runs really strong until you run wide open in higher gears. I can easily do 80mph without running wide open though. I work with a bunch of great guys that rebuild...

Sweet! i'll give it a shot! Thanks again guys!!!

Well, I figured out what happened! Lol, I kinda kicked myself when I did though. So a while ago I cleaned and lined my tank with a Kreem kit...well I didn't cover the vent hole in my gas cap! Stupid, but simple solution. Runs really great now!! Only thing that happens is when I'm running at like...

I really want to get a set of Mikuni carbs I saw on DCC, but the are $335 for the set with K&N filters, cable and extras. I don't really want to spend that, but if I have to so I can stop driving my gas guzzling truck I will. Plus I miss ridin soo bad. Anyway, I'll try the simple stuff first...

I wonder if drilling a hole in the gas cap and putting a vent tube in would hurt?

I'll check the fuel flow too, THanks all!!!

Have recently cleaned the carbs and measured the valve clearances when I rebuilt the engine last month. I can recheck them though. Sparks are timed and I actually am about to upload a video soon of me replacing my coils and plug wires with new ones. I feel like my issue is with the carbs because...

Hey, I'm sorry for not getting back with you, it's been quit a while since I check this thread. Go for it with the sketch man! I feel it was just a quick one, but hey thanks for the compliments! lol Have been wanting to start a new project to refine the idea of a telescoping cowl. I have had...

So...I have been working on my 1971 CB 350 for a long time now. I have been having alot of problems keeping my bike running at medium to high speeds. Here's what happens. I can start my bike and let it run sitting there forever. The issues happen when I take off on the road. I'll let it run for...

My 71' CB350 Cafe Racer- Running...rough but running!

I need both left and right. I think I left them on the old cable and tost it, stupid me.

Hey guys, So i seemed to have missplaced the brachets that attach my carb cable to the carb. I have a 71 CB350 and was needing the brackets as shown in the pic, can anyone help? I'll pay shipping or if your around the Kansas City area I'll swing by. On a budget so I can pay a lil bit. Thanks...

Hey guys, So I had this thread up on: 1-800-CAFE-HELP calledTell Me What ya think? My 71 CB350 cafe project!Well now I can't figure out how to move the thread to here so I'll post my latest video and if you want see the previous ones you can go to the other thread for now. Anyway here's an...

A little update on the project, oh and trying to move the thread to cafe projects, but don't know how if anyone knows? Update CB350 Cafe Racer 5-14-11