Recent content by fly2devin

The front is 3.5" x 18" rim with 110/90/18 and the rear is 4.25" x 18" with 150/70/18 Avon road riders. Sent from my iPhone using Tapatalk

The 30mm mikuni were used. The gain was really not having to mess with the stock carbs and diaphragms. Syncing them was key. It they aren't synced then the bike will vibrate badly and bog. This is the second bike of m-unit. It's a huge time saver and the a lot of the features are nice. Sent...

Video or the tail light http://youtu.be/-z1LsvoyvsU Firing her up http://youtu.be/jTYl-CIo2Lo Sent from my iPhone using Tapatalk

So she is all finished now. Here are some pics Sent from my iPhone using Tapatalk

Parts back from paint Sent from my iPhone using Tapatalk

A shop friend came over to knock out the wiring Sent from my iPhone using Tapatalk

Seat back from upholstery Sent from my iPhone using Tapatalk

Frame back from powder coating. Using the Cognito Moto adjustable triple clamp with motogadget motoscope mini. Motor refreshing Sent from my iPhone using Tapatalk

Motor wasn't horrible. Covered in grime. To get it started I hard wired the coils to the battery, added oil, cleaned up plugs and put a new set of carbs from another bike. Sent from my iPhone using Tapatalk

These are the mounts http://cognitomoto.com/collections/new-products/products/shock-mounting-kit Sent from my iPhone using Tapatalk

http://cognitomoto.com/products/fox-podium-r-rear-shocks Sent from my iPhone using Tapatalk

The tunnel from the cb350 was put into the XS tank. It's a good amount of work. The XS tank is about 4" longer than the cb350. Sent from my iPhone using Tapatalk

Everything ripped back apart for final welding then powder and paint. I had a seat pan from Cliff and used it to create a bottom pan. Should have frame and upholstered seat back tomorrow. Sent from my iPhone using Tapatalk

Threw the motor back in to make sure the tank cleared the upper part of motor. Front wheel and tire were ready but the rear wasn't built yet. Got the rear wheel done and threw on some Mac pipes and reverse cone mufflers. Headlight and mounting brackets by LSL and the ears are old CB750...

Laced up the wheels after powder coating the spokes gloss black and the nipples orange. This is a build for FOX so the Orange is an accent color. I've never tried to powder coat nipples and it wasn't so bad. Just had to be careful lacing and truing the wheel. I really like how it came out...