JAGspeed's latest activity

  • JAGspeed
    JAGspeed replied to the thread Honda 919 Nighthawk Copycat.
    Worked on the seat padding. I glued several layers of different density foam together and shaped most of it with an angle die grinder...
    • IMG_9333 aa.jpg
    • IMG_9334 a.jpg
  • JAGspeed
    JAGspeed replied to the thread Honda 919 Nighthawk Copycat.
    I added a rear brake master. I didn't like how far back the rear-set mount put the master and it was in the way of my exhaust, so I...
    • IMG_9329 a.jpg
    • IMG_9327 a.jpg
    • IMG_9328 a.jpg
  • JAGspeed
    JAGspeed replied to the thread Honda 919 Nighthawk Copycat.
    I originally was going to use a VFR swing arm on my 78 CB750 but there were several issues. The length of the arm was more that what I...
  • JAGspeed
    JAGspeed replied to the thread Honda 919 Nighthawk Copycat.
    I installed rear sets on the bike. They were made for a CBR600RR so I made brackets to mount them to the Hornet. This will also allow...
    • IMG_9284 a.jpg
    • IMG_9285 a.jpg
  • JAGspeed
    JAGspeed replied to the thread Honda 919 Nighthawk Copycat.
    Made a seat pan out of fiberglass. Just need to make a couple of mounts for it then I can glue in the foam and shape it.
    • IMG_9209a.jpg
    • IMG_9205a.jpg
    • IMG_9198a.jpg
    • IMG_9197a.jpg
  • JAGspeed
    JAGspeed replied to the thread Honda 919 Nighthawk Copycat.
    Made side panels out of aluminum to join the tank and tail together. Welded them at the seams and cleaned them up for a more finished...
    • IMG_9152a.jpg
    • IMG_9149a.jpg
    • IMG_9131a.jpg
    • IMG_9128a.jpg
  • JAGspeed
    JAGspeed replied to the thread Honda 919 Nighthawk Copycat.
    Making mounts for the tank was easy enough,but I had several clearance issues, one was the coil, that I had to relocate a little lower...
    • IMG_9126a.jpg
    • IMG_9127a.jpg
    • IMG_9071a.jpg
    • IMG_9104a.jpg
    • IMG_9109a.jpg
Show older items
Back
Top Bottom