Rat_ranger's latest activity

  • R
    Rat_ranger replied to the thread Post a pic of your latest purchase.
    I received a 270* rephase pin for a XS650. I think it'll be used for the one in my shed. I also happen to have a 750 kit sitting on...
    • 20240415_202027.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    Pipes are coated, packed and installed. Slowly getting closer to getting it back on the road. Next big thing will be wiring.
    • 20240406_120902.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    Sendcutsend is worth using if you need some parts cut. For $30 I got 3 crank trigger wheels and 2 cam trigger wheels shipped. Parts...
    • 20240327_152205.jpg
    • 20240327_153152.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    Vapor blasted the side covers.
    • 20240319_183224.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    Sump filter is finished.
    • 20240314_173923_HDR.jpg
  • R
    Rat_ranger replied to the thread PMA conversion..
    I recommend a SH775 reg/rec unit. They are spendy new but can be found used for pretty cheap. Polaris used them on a bunch of things...
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    Almost done with the spin on filter adapter.
    • 20240312_170605.jpg
    • 20240310_144500_HDR.jpg
    • 20240312_170611.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    New exhaust hanger has been fabricated, pipes are off being coated, and carbs showed up from the UK. Switching to carbs since at some...
    • 20240309_131738_HDR.jpg
    • 20240309_151835.jpg
    • 20240309_152047_HDR.jpg
  • R
    Rat_ranger replied to the thread Post a pic of your latest purchase.
    That's why I wanted one. This is an older model, but luckily dynabride still sells all the parts for it. So if I ever need to rebuild...
  • R
    Rat_ranger replied to the thread Post a pic of your latest purchase.
    Bought a tool I've wanted for a while. A dynafile, it'll let me do slack belt sanding on smaller tubes. Found it on ebay for $80...
    • 20240307_152050.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    Thanks, hopefully I'll have it on the road this summer. Depends on how many setbacks I run into. Went to go to work today and had a...
    • 20240222_045458.jpg
    • 20240222_160551.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    A little progress. "New" side cover and oil pump are here. Clearanced side cover for the high ratio primary gears. Going to vapor...
    • 20240219_141131_HDR.jpg
    • 20240219_141142_HDR.jpg
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    I never did find the failed wrist pin circlip. So it's possible.
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    The engine has been split since it broke. So it's been cleaned pretty well. I just had never pulled the oil pump.
  • R
    Rat_ranger replied to the thread Sumotrack rebuild.
    Yeah, not sure how it broke. It's pretty scraped up, but I don't know if that was the cause or an effect.
Show older items
Back
Top Bottom