Recent content by rossbob14

I have 2 sets- one from a 73 cl350 and one from a 71 cl350, I believe they are the same mirrors as a 69 but not positive you can PM if you are interested in pictures or anything. Thanks, Ross

What kinda bike? I had this same exact problem on my CL350 and tried all over to fix it, had carbs appart, replaced seals ect... turned out all i needed to do is retune and synch the carb adjustment for how rich/lean the bike was running... ::) ;D after i fixed the tuning it runs perfect! so...

Grounded Properly?? that's the only thing I can think of that is easy to forget about...

I'm a college student at St Cloud State University in MN and here is something really annoying. There are a bunch of rich kids here who for some reason bought mopeds to get around the campus. They are street legal models and most of them gas powered, but the ridiculous part is they ride them on...

Haha yeah you caught me on the pumas haha but as far as the seat goes, The seat you see in the first pic (original bike) was in really good condition and I didn't want to wreck it. The bike actually came with an extra seat that wasn't in the best of condition. The seat pan was cracked because...

Yes they are the K70's, I really like them, the rear is a 4.0 and the front is a 3.50 I wish they made the front in a 4.0 but the 3.5 still gives it a little bit of a "fatter" look to it. Other 4.0s were too expensive so i just went with the K70's they are the best value out there for the look i...

Thanks guys! I just took a sawzall to it and then touched it up with a grinder...

Here is a post for my Honda 1973 Honda CL 350. I found it on craigslist last spring and got it in good running condition for a grand. It was in great shape. First Picture is original and second is after (no inbetween pics). I knew I wanted to change up a few things on it but I am in college and...

Hey guys, so I have a 1973 CL 350 that I bobbed/trackered out and ever since I got it I noticed a problem. When the engine warms up it idles perfectly but if I crack the throttle to rev it up it will keep steadily climbing RPM's even when the throttle is let back into the start position. I...

No I didn't switch to LED. I will check the forums and see if i see anyone else who had the same problem. and yeah Kevhead75 I tried reving it up but still just a solid light. Thanks for all the imput guys, I'll let ya know if I figure anything out!

Hey everyone, I put in some new blinkers on my 73 CL350 and all the wiring is correct but the blinkers aren't blinking. They will just stay on solid when I flip the control switch. I was wondering if anyone had any advice or thoughts on where to look for the problem. I checked the honda twin...

Quick question, are you running baffles in your pipes or are they strait? If you are, what baffles?