Recent content by stange_dk

It's pretty good, I'm not a fan of seats that are just for looks so I used 7cm talk seat foam for it and shaped it with a bread knife. Did 2+ hours of non stop riding without feeling uncomfortable. Also the seat height makes the overall riding position more comfortable... Sent from my iPhone...

1 AM the same night: bike assembled, headlight brackets fabbed and ligths mounted and all wires hooked up. Fired it up outside and it sounded sweeet... Next morning I put the seat cover on that a friend had sowed and took off for a seriously fun ride on the Swedish back roads. The bike handles...

Here's the painted fairing And the bike without subframe and fairing bracket.. the day before I had to go on a weekend long ride :)

Spring has finally arrived, so I got busy in the workshop... pretty much had the dry build ready but didn't know what to do about paint. In need of a quick option I opted for Würth Quattro spray paint, which is dense and flexible, which makes it good for fibreglass that flexes. I also painted...

540nova: oh yes, I'm a big fan of XTR pepo's bikes ! Sent from my iPhone using DO THE TON

I decided to try the dual headlight setup now that I already have an extra light kicking around... Making the brackets Test mount... too far from each other? Too high? It's really hard to judge on an unpainted bike. I'll have to meditate and stare at it for hours :) Sent from my iPhone...

Had a little workshop time so I made the bracket for the new exhaust. I'm pretty excited about this setup :) Sent from my iPhone using DO THE TON

Johnpete, I have actually thought about that too. Now that I have been looking at the single light for a few days I think I will go with two. Gotta see if I have a smaller light kicking around... if not it will just be ordinary dual lights ... Sent from my iPhone using DO THE TON

I mounted one light in front... still on the fence about one or two headlights... Got a friend who's better with the welder to weld my new pipe to the connector pipe Got it mounted and couldn't help but firing it up - holy lightning it sounds good! Very deep tone and not too agressive...

I was seriously considering buying some expansion chambers just to have them on the shelf for a future project :) Most of the exhausts were around 50 bucks...

I went to Bali on vacation and managed to track down the guy who fabricates the exhausts and pipes for all the custom shops in the area including DEUS, he had a GP style can (which I have been looking for) on the shelf so I snagged it for a good price :) Here's the shop, quite impressive...

Got the zx6r shock installed, easier than I expected! Next up is getting the wiring mess sorted... Sent from my iPhone using DO THE TON

A bit more progress, got the whole front fully welded and made a license plate holder. Next up: headlight bracket [emoji106] Sent from my iPhone using DO THE TON

Thanks guys [emoji106] I got some more stuff done today - fairing mounting "arms" shaped and welded to the main bracket - got the DZUS locks on there as well - instrument mount cut, tack welded and test fitted... Next up is tack welding the instrument bracket to the fairing mount and then...

That team hammer bike is sweet! I got my showa shock today, can't wait to test the bike with this upgrade [emoji106] Sent from my iPhone using DO THE TON