Search results

Rims are powder coat. I used USC 2k Epoxy spray paint on frame, hubs and swingarm. I also used Rust oleum clear coat on most everything. Thanks for the complement.

I started the bike for the first time yesterday. I didn't have much time, I had to take my son to basketball practice. I made a temp fuel tank just to see if it would run or not. To my surprise, it fired up on the 3rd kick! I have never had a bike do that especially when they have sit stagnate...

Thank you. I can’t wait to ride this thing to work

I'm using the Trail tech Vapor for gauges, LED headlight, turn signals and tail lights. After market controls and electronic ignition. I have rebuilt both carbs and started with a new wiring harness. I have almost everything wired up already. I just have to fab up a coil mount before wiring will...

I finished wrapping the exhaust and making the mount.

This is after I finished the tach delete, starter delete, and finished painting engine covers.

Test fit assembly and my initial paint for the tank. Later, the tank will fall and I would have to start all the way over!

I also purchased a sandblaster attachment for my pressure washer and it worked amazing for stripping the engine. Here is the engine after primer and paint.

After powder coating, lacing and painting brake hubs.

I had to grind down allot of the curb rash and rust on the wheels before powder coating.

Paint and primer on the frame

Battery/electrical box

Welded the bar in and boxed in the frame. I also did some weight reduction and removed the center stand, helmet holder, and fork lock.

Started cutting.

Rust repair....

After I assembled it to create a parts list.

Hello everyone! I'm new to the Honda twins and wanted to post my build here. I also have my build posted on other forums but figured I would try this one out. I sold my Harley (2000 Dyna Wide Glide I cut up a little) when my back went out and didn't think I would ever be able to ride again...