Search results

I think the add pretty much says it all. I thought someone on here might be interested. I would like to sell everything as a lot. If you have questions feel free to ask ? http://louisville.craigslist.org/mcy/1802074986.html Rob

I'm looking into replace everything on the rear tire Including the wheel bearings, but there's the bearing retainer that I'm assuming I need a special bearing retainer remover tool to get it off ? Its on a Honda Cb500, and I was wondering if anyone has any ideas of what I could use to improvise...

I picked up a stock set of sprockets and a new 530UO KMC O-ring chain for my 73 HONDA CB5004 and was told recently that the chain might not have enough clearance on the front sprocket. Anyone know if this is true, before I go through the trouble of taking it all off ? I'm sure someones either...

I have a pretty complete top end gasket kit, but the cylinder head camshaft rubber sealings are missing. Does anyone know if this would work on a 72 honda cb500 Four ? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=380210893408&ssPageName=STRK:MEWAX:IT I thought they might be...

I'm looking for a clutch lifter rod for my 1972 cb500. Mine actually works but its currently broke in half if you have one let me know. I can't seem to find one from the devil ebay, so I though i might be able to score one here ?

I have a cb500 basket case that I want to get up and running and I've noticed that my wiring harness has some melted wires and so does the panel. I picked up a new panel for it a while back, but unfortunately it had the round connectors, and I need the straight connectors. I noticed a nice...

I cant seem to figure out if its 35mm or 39mm that works on the cb500 ? I have Uni filters now, but they don't seem to specify anywhere I can see on the filters. Thanks in Advance for the answer & I did do a search on here and sohc4.net with no luck before posting this.

I was wondering if buying a new Regulator and Rectifier would make a difference on my CB500. As far as I can tell my old ones work fine but noticed that there are better performing ones available with lifetime warranty (Oregon Motorcycle Parts). Any info would be appreciated on this.

When adjusting valves on a cb500F should it only take 1 360 rotation at TDC (T 1-4 mark) to do them all or are you supposed to also line up TDC (T 2-3 mark) and adjust those to ? I did them before and have read from two different manuals that both give different info on getting the job done...

I think my battery is about shot & I was thinking about switching to a AGM maintenance free battery. I found some on westcobattery.com that fit the CB750 but can't seem to locate one for the CB500. Does anyone have one on their 500 or know if the battery from a cb750 will fit a cb500 ? Any info...

I'm looking for a New or used unbroken Clutch Lifter Rod for a Honda Cb500 1971-73. I just discovered while changing my clutch cable (that was about to break) that my current lifter rod is broke. It looks like it may still work because the break is a super clean cut ? I think the part has been...

Looking for a oil pan for a cb500. If you have one available for sale hit me up ! Thanks !

So I'm in the market for a new gas tank for my 73 cb500 I have but I'm not quite sure what will fit besides the 550 tanks. I'm just wondering what if there are any other tanks that will fit with little to no reworking of the stock mounts. I know you guys have some pics and info so hit me with it...

I'm new to the game of Cafes, but have loved them since I first set eyes on one. I've owned a couple bikes in the past. I've been looking for a 70's Honda or Yamaha 500-650cc during the off season & was fortunate enough to come across 2 CB500's from a cat named Sonny (which is also on here) last...

Newbie here looking for a straight 71-73 CB Gas Tank w/ little rust and dents. If you have one available let me know & Thanks in Advance !