Search results

G'day guys, Chasing a kick start lever for my CB400F if anyone has one, or knows where I can score one? Can't find any on eBay. Cheers, ________________ Dan - OLDN64 Perth, Australia.

G'day guys. Anyone got any advice for fitting a Martek 440 to a CB400F? Wiring diagram pictures etc? Tips for fitting? Cheers boys. --- I am here: http://tapatalk.com/map.php?hn4ora Cheers, ________________ Dan - OLDN64 Perth, Australia.

Hey guys, I'm about to fit up my nice new shocks on the rear of my CB350F and have no idea what size/thread nuts they are. Any help? Has anyone used a nylock on theirs? Or what would you recommend ? Also, obviously stainless is not ideal, what should I look for as far as a nut is concerned...

G'day Lads, Wondering if anyone out there has a CB400F carby top cover to spare ? I recently purchased a set of four carbs which were meant to be "complete" however, when they arrived I found that one of the top covers was missing. Any help, as always, is much appreciated boys. Cheers...

G'day guys, I'm in need of a wiring loom for my CB400F. Wondering if anyone has a really bad old one for me to use to make a new one? Or if anyone has made one and can give me some pointers and detailed pictures/photos? Cheers guys. --- I am here: http://tapatalk.com/map.php?of4hzq Cheers...

G'day guys, Wondering if anyone knows the difference (if any) between a CB350F triple clamp and one off a CB250N ? I've measured the forks, which are 33mm, same as the 350F. The distance between the forks is the same as the 350F. But what about the diameter of the center stem which slides up...

G'day guys, Wondering if anyone knows the difference (if any) between a CB350F triple clamp and one off a CB250N ? I've measured the forks, which are 33mm, same as the 350F. The distance between the forks is the same as the 350F. But what about the diameter of the center stem which slides up...

G'day guys, I'm building a CB350F with a 400F engine. I've ordered, and received my beaut tank and seat combo from Legendary Cycles in the US. Mock fitted it, and decided not to go with the loop on the frame as the seat is a little wider than the frame and I think it would look odd. So now I'm...

G'day guys, Does anyone have the specs, in particular, the size of the front brackets for and engine mount on a '72 CB350F with a CB400F engine? I understand that they are the same brackets? If anyone has some schematic pictures/diagrams or just the measurements it would be most appreciated...

Hey guys, Just getting my thread started. This is my CB350F frame. My tank and seat arrived today from Legendary Motorcycles in the US. Must say, I'm really happy with the look of it. I have a CB400F engine arriving any day now. The bike is finally starting to take shape. --- I am...

G'day all, Wondering if anyone knows where I could pickup a Kick start lever for my Cb400f? Or if anyone knows of another type of lever that fits and looks alright? --- I am here: http://tapatalk.com/map.php?jyxlkw Cheers, ________________ Dan - OLDN64 Perth, Australia.

G'day guys, So I picked up a front end (trees, forks) and a front and rear rim from a mates old '80 model Cb250 twin. Fitted them up to my Cb350f frame last night, seemed to bolt up okay with the exception of the rear axle which is too long. Has anyone tried this before ? The reason I ask is...

G'day everyone. I was wondering if anyone can shed some light on rear shock height selection? I'm building a CB350F cafe with a 400F engine. I've ordered my tank and seat from Legendary Motorcycles in the US and plan on doing my own rounded bar for the arse end of the frame (to double as a...