Search results

Got it never mind! This will do the trick and will be ideal. Thanks a lot, will order myself one :) Brgds Wannes

This actually might do the trick!! Where do you mount this ? don't get it :). At the top between your frame or... ? Brgds, Wannes

Learned this is the wrong spring. The Original XR600 shock is perfect however too long, its ass is pointing to the moon. Does anyone know if an XR400 monoshock is shorter? Wannes

Update :) Struggling with the monoshock. This is from a Kawasaki ZX ... something (quite old). Did the paint & refurbishing but the shock is way too soft. When I sit on it it easily drops 3 inches giving me almost no clearance with the tyre. Any idea I can get some air in it to harden it ...

Slow but steady Brgds Wannes

Decided to stick with the 21" front for now. seems alright. Added fender & light. Next up is front fender. Then all can go out for paint. Wannes

Put all together for a mock up. Fenders & front wheel is next ... Thx, Wannes

Thanks Hurco!! Dropped them an email. Also thinking about an 19" SLR front wheel. Would this be p&p with the axle of the xr600 / calliper? Just wondering... Wannes

Anyone an idea where I can get my hands on some spokes, with ideal length? XR600 front hub, 19" excel rim ... Would like to try the lacing myself Brgds Wannes

Been a long time, but been busy. Finalised welding on the frame. Detachable passenger foot pegs. Headlamp bracket done. Gas tank mounts done. Front fork been lowered 12 centimeters. Decided to go for the Honda cb350 tank, way better. Made a seat pan as well, picture to follow.Well all needs...

Restarted on the subframe, wasn't happy. Got some thicker tube. No rocket science here just bending tubes the old way. Stuffed it with sand, welded the ends & heatened it in the BBQ. Should be finished end of this week. Brgds Wannes

Hi guys, Started on the subframe.

Hi, Checked on google and there is a '92 Kawasaki spring with ideal length. Bought but didn't fit the top, welded the top frame. I have begun welding the subframe now.

Hi all, Fuel taps of this Italian tank were hitting the frame so re-allocated these: Just quick mock up (I know the front forks are in the wrong way): Rear spring should be 3/4 inch higher. Does anyone have an exploded view for XR600 rear spring ? I should have a rear spring exactly 1"...

I lowered my front fork 4.7 inches. All went fine, easy to do actually. @ThomPa, Seat will be done myself. I will need to lower my rear end approx the same, maybe bit less i'll need to check. Anyhow, anyone with an idea which monoshock would fit that is lower than standard xr600? Think with...

Hi all, My cb550F caferacer drives great (http://www.dotheton.com/forum/index.php?topic=62970.75) Now it's time to put my hands on a scrambler so I can ride together with my girlfriend. °Honda 1992 XR600 °Will drop the front about 12cms (meaning I would open up the forks & cut springs etc...

Well... Pretty much done! Brgds, Wannes

Well it's almost done ... Just paint on the seat and thats it Just needs some extra heatwrap & details. Fully done in approx 1 month. Before: After: Took me about 5 months (only having time once every 2 weeks)

Out of its stable :)