Search results

Hello, Any one replaced a CJ360 kick start shaft before? Will I need to open the bottom case to do this? Thanks

Im not getting any charge coming out of the 3 yellow wires while its running, those should be the ones with ac current right? There are too many wires coming out of this thing

Hello, My cb550 is not charging, the three yellow wires coming out of the alternator all show that they are grounded, is that enough proof that i need a repllacement?

I'm painting my tank satin black. I have the primer in and a nice finishing coat of the satin black on. Do I have to clear cost it too? I like Darin black because it's less shiny, but last time I painted a tank, gas stripped the clear cost and paint right down to the primer. How can I...

I ended up Using a HD2 needle with P8 Needle jet. This helped alot, Its pritty balls out now, iwas surprised at first when the front tire popped up a bit with throttle-but Theres a small flat spot right off idle. Its better when I raise the needle, Im pritty sure my slide is lean. I really...

Re: Nice tank for sale. Hey-Still looking to sell the tank? Can you come down a bit on price? Thanks, Dennis

I have two new Vm32s, not ever used. I would like $150 for them, or may be interested in trades, nice pair of rear shocks in particular

cool, thanks man! Parts ordered,ill report back

Thanks alot, great info. In making changes to the NJ, i sone size up or down a big change, or should I go two?

Hey Pete! I still might get Vm32s and sell mine. Right now I have it running well on all throttle positions, but I need to have the needle on the second to top, which makes around 1/4 throttle a little lean. Im going to order a leaner Needle Jet, so I can drop the needle clip a position with...

Thanks rich! I think maybe our VM34s might have came the same, I had to get a leaner on the Needle jet right off the bat. They came with 260MJ, 2.5 slide, 6DH4 needle, and Q2 NJ, which made the entire mid-range rich even at the top needle clip, regardless of the MJ. I then got P6s NJs which...

Thanks rich! All I have is velocity stacks with a steel mesh screen, and fairly open exhaust. From fiddling around, I have gotten most of the different throttle positions to perform well(at different times), so Im hoping I can Make the VM34's work, otherwise Ill go ahead and put the Vm34s up...

Thanks for your input. I wish I would have got the Vm32's,i mistakingly thought 34s would be good because there the same size as the stock carbs. Unfortnatly, people are usually only looking to trade for smaller VMs and not 34+'s. Im gonna try to make these work, and if need be switch later(at...

Hello, Any help would be greatly appreciated! I am in the proccess of tuning Vm34s on my 1980 Suzuki GS450. Slide-2.5 P6-Needle Jet, 6DH4 Needle -I started out with the richest pilot I have #35, Needle second to bottom, Main jet 200. The pilot was way too rich, idled pritty good with the...

OK, well thanks for the info,Im glad I asked

Ooops, that was a typo. yes the GS450L has a stock 16" rear. I have the STOCK tire size from the other GS450 Model which had a stock 18" rear. I want to use these shocks, but ive never messed with shocks, Im wondering if you can compress them to the stock 13" length...

OK, thanks for the help!

Thanks, its essentially the stock rear tire, if I get longer shocks is there a way to compress them down to a specific size before installing them?

Thanks, it is a much bigger wheel. My stock GS450L had a 19" Front wheel,and 13" rear wheel. I took the wheels of a GS450E (i think) which had 18" front and rear. The frame,axle and spacers and everything is the same for the two bikes. If I order longer shocks the pair I posted the link to...

Hello, I fitted a bigger rear wheel to my bike, I think it looks much better, and I really like the feel. With the new rear tire, the tire gets very close to my battery etc.. under the seat when going over a big bump. So I guess I need stiffer or longer shocks? The stock shocks on there now are...