Search results

Hello, Any one replaced a CJ360 kick start shaft before? Will I need to open the bottom case to do this? Thanks

Hello, My cb550 is not charging, the three yellow wires coming out of the alternator all show that they are grounded, is that enough proof that i need a repllacement?

I have two new Vm32s, not ever used. I would like $150 for them, or may be interested in trades, nice pair of rear shocks in particular

Hello, Any help would be greatly appreciated! I am in the proccess of tuning Vm34s on my 1980 Suzuki GS450. Slide-2.5 P6-Needle Jet, 6DH4 Needle -I started out with the richest pilot I have #35, Needle second to bottom, Main jet 200. The pilot was way too rich, idled pritty good with the...

Hello, I fitted a bigger rear wheel to my bike, I think it looks much better, and I really like the feel. With the new rear tire, the tire gets very close to my battery etc.. under the seat when going over a big bump. So I guess I need stiffer or longer shocks? The stock shocks on there now are...

does anyone know where to find a double outlet petcock thats not too much money? This pingle one can be a universal fit with the an adapter plate but its $116, http://www.z1enterprises.com/Petcock--Pingel-HighFlow-Fuel-Valve--DOUBLE-OUTLET-28.aspx

Hello, This is my first time trying to plug chop, this is lean right? I dont have a very long stretch of road to use, so hopefully it was long enough found this picture on http://kawtriple.com/mraxl/carb/plugchop.htm, which one am I going for? thanks! Dennis

Hello, I want to get flatslides for my Suzuki GS450. Mikuni TM34's are only 115 a peice, so Im considering them. the TM33's have pumps, but I have no expereince in them so im not sure if there worth the extra 100 bucks a peice. Also, I have mikuni Cv carbs, are the jet sizes between the two...

Hello, Just got a very nice 1974 CB360, going through the carbs and found one was missing a part. Its a plastic plug, on this picture its the white plastic piece, below where the float bowl gasket would be, in line with the main jet. Does any one know the part number, part name or where to find...

Hello, Its time for new tires, and I would like to get bigger ones this time. Stock is, 3.0-18 and 3.5-18 What size would be a good increase to try? Thanks!

Hello, I have a suzuki GS450, I'm interested in fitting some other mufflers on my MAC 2 into 1. Ive seen cafe bikes with yosh mufflers and i always think ti looks cool. My question is, what kind of inner diameter should I look for on the muffler relative to my headers? My headers are 2 inch...

Hello and thanks for your help! Its my first time painting a gas tank. I just sanded down the clear coat the final time and am starting to buffer it. I started with rubbing compound, and i have a polish to do next, and then ill do the wax? My question is, when do I know when im done with the...

Just put velocity stacks on, how do I make a filter for them? Thanks!

Got these then found an exhaust i really like, unfortunately the pipes block me from putting the rearsets anywhere comfortable, so my loss is your gain. Completely unused, save $$$$$$$$$$!

Heres a 1998-2002 Honda CBR929RR rear sets, includes shift linkage, heel gaurd, even brake light. I can include the frame clamps I got to use them. I was planning on using this method, http://www.tonup.com/phpBB3/viewtopic.php?f=6&t=1284 But changed my mind. Im located in NJ

Hello, Can any one post pictures of there loaded gun rearsets mounted?

Is it ok to drill the frame to bolt the rear sets on? Or is that messing up the frame too much?

Hello, Im trying to get my new cb360 running, it starts and idles it wont charge. The stator is good. It has a new R/R from the previous owner. Its a CB750 unit. Im not sure how to test it. There is a green, red, pink and yellow going into the unit and a green black and 2 yellow going out...

Im planning on trying this method, http://www.tonup.com/phpBB3/viewtopic.php?f=6&t=1284 If i buy this linkage set, will I still need to buy some Rod Ends or does this include something for that? Thanks!! http://www.tcbroschoppers.com/store/index.php?main_page=product_info&cPath=16&products_id=15

I Just got this CB360,It appears to be stock, but has weird jetting, can anyone tell me if this looks like the stock exhaust? Thanks!