Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I've been experiencing the joy of the electrical system on my cb350 lately. As of late, I charge up my battery, ride 5 mins and it's dead.
Fast forward: Sitting on the side of the road, I measure <1VDC on my battery. I decided to check continuity between the battery terminals (I know this is...
I bought a voltage regulator from Oregon Motorcycle Parts, installed it, rode 30 miles and parked. Went out to my bike in the morning, made it about 7 blocks and my battery was dead. Jump started it off a car, rode about 10 minutes to charge up the battery and it died.
I verified my bike was...
I just put my forks back on and was in the process of putting on the front wheel when I noticed the disc brake did not want to slide back between the two pads. I've tried separating the two pads with a flathead but still haven't gotten it back on.
Any suggestions on how I can get this back in...
I bought a new triple tree and fork gators, as I plan to pull off the stock shock coverings to replace with gators and then run clip-ons. Does anyone have experience removing the forks? Just wondering if this is doable by myself and/or if anyone has any tricks to make it easier. I was planning...
I want to replace my condensers as I think they're going out. Looking at the manual, I think I will need two. About to buy these, but not sure if this is all I need?
http://jerryscyclesvintageparts.com/Honda-CB350F--CB400F-Points--Condenser-P336069.aspx
Would quantity one of those do it? Or...
Does anyone have experience making or repairing a float bowl gasket? Upon pulling my carbs for the second time, one of the was cut in half (assuming it wasn't seated in there correctly when I wrenched it down).
I'm not going to replace them, I'd rather make them. I've read that you can buy...
I have found my bike doesn't want to get past 4-5k in all gears. I'm running un-oiled K&N pod filters, size 85 main jets and a 2-1 exhaust on both sides with mufflers. When I was able to get to the top part of the gears earlier, it sang like a bird. Now I can't seem to get out of the low end...
Hi all,
Currently sitting in a hotel room, wishing I was back home working on my bike. Anyway, I'm trying to plan my attack for my exhaust. I currently have two 2-1 megaphone pipes that bolt onto the rear footpegs and extend to the rear axel. Cool. Except I want to cut off the rear footpeg...
Hey Guys,
I'm finally starting a build thread For my cb350 I've nicknamed Woods. I bought the bike in the Spring of 2010 and rode it mostly stock all summer; The only exceptions- Pulled off the signals and other "useless" stuff and threw on some clubmans. At the time I wasn't 100% positive...
Hey Guys,
I've got a 1973 CB350F that ran like a charm last summer... Until one day. I thought it was a bad tank of gas, but the problem has persisted. Here is the deal:
Starts first or second kick, as always. Warms up and rides like a champ. Smooth acceleration and full power through all...
Hello, I'm a 22 year old Seattle guy who has finally joined. Currently riding a '73 CB350F around town and procrastinating working on the '78 CB750 that is in pieces. This summer I plan to do a bit of work on the 350; I'll start a build thread soon!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.