Search results

So I haven't done much as of recently (job searching has been my main priority), but I finally landed a job that will pay for all my dreams for this bike after 2 years of heartache. Just to show a decent update, I do have the seat put together and it now has a custom made cushion made for it. My...

General question for the DoTheTon-o-sphere, How do we feel about aftermarket left-hand controls, as in which ones are good and which ones should not be considered. Right now I am leaning towards these (PS the originals were cracked and buggered up before I even got the bike)...

I'm signed on. I haven't been on this forum in a minute, but I decided to get back on because my bike is finally going to be dug up from the grave (corner in my garage) that its been sitting in for almost 2 1/2 years now. I'll being paying close attention since I will probably be ending up...

Alright, circa 2016. I know I haven't posted any pictures, any new updates, etc. for almost 2 years now, mainly because I haven't really had the chance to work on the bike as much as I would have liked during that time period (going to college doesn't help with having "extra" time to do things...

Side note, it does not look green at all. Idk why the hell it looks like that in the picture.

more pics

Man have i been horrible at updating this thing. It honestly probably stems from my despise to social media >:( Any who, I have a but load of updates. First off, i have found my inner pablo picasso and just painting every lil thing I can. Ive got one pic below showcasing one of the colors I...

So if i dont get the sports bike rear sets i want, maybe ill make my own?...

More Pics ;D

VERY Long time, no post. Sorry guys Ive been caught up with school and work. Plus when its averaging single digit temperatures outside, its a little harder to stay out in the garage and be motivated. However I have been chipping away at some things. Lapped the valves, cleaning the fins on the...

Im starting to get really itchy when I'm doing non-motorcycle stuff. So i decided to see how well I could do by trying to mock up a seat in Solidworks. Theres more to come, this was just my first attempt.

Alright, gots an update.... Went out and worked on the bike a bit, got the from the nearly off, all thats left is the triple tree nuts (which are on freaking on there good). So not really anything pretty or cool, since this Toledo weather is about as temperamental as a woman trying to get ready...

"Found this in the backyard, buried. The name "Marty Mcfly" was written on the tank. Weird."

Got bored so I figured I could try something out, sandblasted the exhaust joints. I think you can tell which one and which isn't sandblasted. :)

I just went to your build to check some things out, and i found the parts list manual.......WAHHHHHHHHH!!!!! so much easier with buying new fasteners.

Pics continued 8)

Okay since I haven't posted in a while, figured id probably should post an update. You can see that I got off all the top end stuff. My next move is to clean everything up, lap the valves, hone, and install the new rings and get her back together. Meanwhile, I will be removing everything off...

Bump

Okay so i tried to get some work done on the motor now that its out and i was just about to pull the cylinder head cover and then realized that it was not going to move. What happened was i was able to get off all those stripped screws with a couple E-Z outs from the depot. After i got those...

Re: "Let's call it The Green Hornet" // Short film trailer Oette, Im gonna have to steal the tachometer/digital display idea from you, building my own cafe-er out of a 1978 cb550 right now actually and ive been thinking about doing some type of single gauge system. On anoter note, im in the...