Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I'm going to need to swap exhausts anyways to run rearsets and I'm going to be running pods aswell, so I'm sure I'll have to re-jet the stock Keihins anyways. How hard is it to get the jetting right on the Mikunis Vs The stock CV carbs?
Ok, so I finally got around to testing the compression. It looks like I was getting about 90psi in eat cylinder with the engine cold. I added a bit of oil through the spark plug hole and saw the pressure go up to 120 psi on each side. I then ran the bike for about 10 minutes to burn off the oil...
The PO who restored it without touching the motor said he measured the compression at 115 psi, which leads me to believe that I need to crack the top end and take a look. It's definitely burning oil. I'll be moving it to my work where I'll have a better shop set up and start tearing into things...
I've been lurking for a while but this is my first post... I'm hoping that over the coming months, you can all give me a hand getting my bike ready for summer!
Picked up this bike off CL a couple weeks ago. Rode it for a week or so and everything is working, but it's smoking pretty bad. I'm...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.