High compression CB450

xtpx

Been Around the Block
Hey guys so I'm looking into the wiseco 70.5mm high comp pistons. Do any of ya have any experience with them? Just wondering what the bump up in compression is going to feel like.
 
I used Venolia pistons on my Camel Back 450, 4 speed. It made a huge difference! watch your deck height, you may need extra base gaskets to get the proper squish band of around .050". To be on the safe side, follow piston clearance recommendations, if forged pistons. Those puppies can grow when hot.
 
Nice thanks for the tips!! I'll be ordering the pistons once I get a new tranny. Gonna go ahead and get all of this done at once.
 
Gonna try and build the motor, make a seat, de-tab, and weld up a frame hoop all in 3 days. Also going to repaint and put knee dents in my tank.
 
gingerXlightning said:
Gonna try and build the motor, make a seat, de-tab, and weld up a frame hoop all in 3 days. Also going to repaint and put knee dents in my tank.

If you do that in three days I'll eat a horse
 
Hahaha you better get ready!! Its gonna happen. I work quick. Sun up to sun down I get Friday Saturday and Sunday off every week so I only have 3 days to get as much done as possible
 
Back
Top Bottom