Welding Service in the NW Suburbs

[krukster86]

So I am creating a racing cowling for my 360 from an old fuel tank. The problem is that there exists a big hole in the back of the cowling that I would like to fill up. I would like to get a curved piece of sheet metal welded to the inside of the tank so that I could have some backing support for some Bondo that I will lay down.

Anyone know of a welder in the area that is looking to make a couple extra bucks on a lil project like this?

 

[Cafe_to_go]

So I am creating a racing cowling for my 360 from an old fuel tank. The problem is that there exists a big hole in the back of the cowling that I would like to fill up. I would like to get a curved piece of sheet metal welded to the inside of the tank so that I could have some backing support for some Bondo that I will lay down.

Anyone know of a welder in the area that is looking to make a couple extra bucks on a lil project like this?

I have a guy that can weld just about anything, except a broken heart (LOL). However he is located in Cicero, IL, I would recommend to stop by instead of calling and asking for a price, if you are interested let me know and I will tell them I am sending you and to take care you. The address is 1626 S. Cicero Ave., Cicero, IL 60804 they are right off the 290 & Cicero Ave. They are open Monday through Sat. MF 9to5 Sat 9to2

 

[ProTeal55]

Give my buddy Nyle a call over at S&S Chassis --->
http://www.sschassis.com/
He can weld/build/create/fix anything you can think of.
Tell him Joey with the Blue Nova sent ya..

 

[krukster86]

Thanks for the info guys, but I found someone to do it for super cheap on the Chicagoland Sportbikes forum a while ago